3000L/Hour-Single-Stage-Vacuum-Transformer-Oil-Purifier is applied to removes free or soluble water, gases, particulate pollution from unqualified or used transformer oil, capacitor oil, cable oil, circuit breaker oil, mutual inductor oil, switch oil etc. It can increase oil breakdown voltage.
ZY-50 Single Stage Vacuum Transformer Oil Purifier Introduction:
HOPU ZY Series single stage vacuum transformer oil purifier is mainly used in electric power project, petroleum, chemical, mining, metallurgy, manufacturing and other industries. The machine is applied to purify unqualified or used transformer oil, capacitor oil, cable oil, circuit breaker oil, mutual inductor oil, switch oil etc for new installation or maintenance of equipment. It removes free or soluble water, gases, particulate pollution etc, and increase oil breakdown voltage. This machine can also be used for vacuum drying, vacuum oiling, and hot oil circulation.
Features:
1. Compact design, low noise, easy operation, long maintenance interval, low energy consumption, low operating cost.
2. Strong ability to remove impurities: ultra-large area cylindrical precision filter element, with high filtration accuracy, easy installation and replacement.
3. High-efficiency vacuum dehydration and degassing system which can rapidly and effectively separate water, gas from oil.
4. Double-infrared automatic oil level controller to ensure a balanced flow of incoming and outgoing oil.
5. pressure protective system to ensure the machine operation easy and safely.
6. Excellent heating system: heating uniformity, less power consumption, safe, reliable and long service life.
7. Safety interlock protection: oil pump, vacuum pump, heater interlock protection, in case there is any fault, machine will stop automatically.
Technical data
Parameters | Unit | ZY-10 | ZY-20 | ZY-30 | ZY-50 | ZY-100 | ZY-150 | ZY-200 | ZY-300 | |
Flow rate | L/min | 10 | 20 | 30 | 50 | 100 | 150 | 200 | 300 | |
Working vacuum | MPa | -0.06 ~ -0.095 | ||||||||
Working pressure | MPa | 0.4 | 0.4 | ≤0.4 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | |
Breakdown voltage | KV | ≥55 | ≥55 | ≥55 | ≥60 | ≥60 | ≥60 | ≥60 | ≥65 | |
Moisture | PPM | ≤5 | ||||||||
Gas content | % | ≤0.1 | ||||||||
Impurity content | μ | ≤5 | ||||||||
Temperature range | ℃ | 10 ~ 100 | ||||||||
Power supply | 220v/380v/400v/415v/50hz/60hz | |||||||||
Working noise | dB(A) | 60 | 63 | 70 | 70 | 75 | 70 | 70 | 70 | |
Heating power | KW | 18 | 18 | 24 | 30 | 48 | 52.5 | 57.5 | 60 | |
Total power | KW | 21.5 | 22 | 26.5 | 33.5 | 51.5 | 57.5 | 65.5 | 68 | |
Inlet/outlet caliber | mm | φ20 | φ20 | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | |
Weight | Kg | 150 | 200 | 260 | 300 | 400 | 450 | 550 | 600 | |
Size | L | mm | 1000 | 1050 | 1100 | 1200 | 1450 | 1600 | 1800 | 1900 |
W | mm | 700 | 750 | 800 | 950 | 950 | 1100 | 1200 | 1200 | |
H | mm | 1300 | 1350 | 1400 | 1500 | 1650 | 1800 | 1900 | 1900 |
Type selection
Single stage, Standard Vacuum System
Two-stage;High vacuum system
Two-stage+Two vacuum chamber;High vacuum system
Optional
A : Without Enclosure, open type
B : With Enclosure, Cubicle enclosure type
C : With Skid base type
D : Mounted on casters (Weight limited under 1000kg)
E : Mounted on Trailers (Pneumatic tyre, Speed selectable)
F : With fuller's earth regeneration chamber